8 Best Horizontal Band Saws for Metal Cutting 2021

When you read this, you must have complete knowledge of horizontal band saws, especially the metal cutting ones. Sometimes, people consider it to replace their regular metal cutting saw and chop saw. These handy project managers manage large and small metal, wood, lumber, and more ferrous things simultaneously.

If you are a hobbyist, then it must be a fresh start. So you may get overwhelmed at the stores by the collections of horizontal band saws for metal cutting. Like you, others even get involved in a battle to choose among them. Potential customers buy ones that offer the most similar to a vertical band saw.

In case they are costly but conclude with a basic range of good features at the same time. All your questions regarding the horizontal band saw you will find through this article. We bet neither to find the better one than hand-picked below. 

If you are love to follow trends and want to use the best horizontal band saw for metal cutting then the  KAKA BS-712N will be the best option for you. This item comes will all basic and necessary features. 

Would you like to take the challenge with our picked metal cutting horizontal band saw? Hope you are ready to go for now.

List of Our Favorite Picks

Preview
Overall Best
KAKA BS-712N, 7-inch Metal Cutting Horizontal Band Saw with 1.5HP motor
JET HBS-916, 9"x16" Four-Speed Horizontal Bandsaw (414468)
Dake SE-712 Model Standard Duty Horizontal Band Saw, 120V, 1 Phase, 63-1/2" Height x 21" Width x 56" Length
Baileigh BS-250M Hydraulic Horizontal Mitering Band Saw, 110V, 1.5hp Motor, 1" Blade, 8.93" Round Capacity
3 Speed!!! 1 HP 4 in. x 6 in. Horizontal Vertical Metal Cutting Band Saw FEDEX
SHOP FOX W1715 3/4 HP Metal Cutting Bandsaw
Product
KAKA BS-712N, 7-inch Metal Cutting Horizontal Band Saw with 1.5HP motor
JET HBS-916, 9"x16" Four-Speed Horizontal Bandsaw (414468)
Dake SE-712 Model Standard Duty Horizontal Band Saw, 120V, 1 Phase, 63-1/2" Height x 21" Width x 56" Length
Baileigh BS-250M Hydraulic Horizontal Mitering Band Saw, 110V, 1.5hp Motor, 1" Blade, 8.93" Round Capacity
3 Speed!!! 1 HP 4 in. x 6 in. Horizontal Vertical Metal Cutting Band Saw FEDEX
SHOP FOX W1715 3/4 HP Metal Cutting Bandsaw
Star Rating
-
-
-
-
-
-
Prime Status
-
-
-
-
-
Overall Best
Preview
KAKA BS-712N, 7-inch Metal Cutting Horizontal Band Saw with 1.5HP motor
Product
KAKA BS-712N, 7-inch Metal Cutting Horizontal Band Saw with 1.5HP motor
Star Rating
-
Prime Status
-
Preview
JET HBS-916, 9"x16" Four-Speed Horizontal Bandsaw (414468)
Product
JET HBS-916, 9"x16" Four-Speed Horizontal Bandsaw (414468)
Star Rating
-
Prime Status
-
Preview
Dake SE-712 Model Standard Duty Horizontal Band Saw, 120V, 1 Phase, 63-1/2" Height x 21" Width x 56" Length
Product
Dake SE-712 Model Standard Duty Horizontal Band Saw, 120V, 1 Phase, 63-1/2" Height x 21" Width x 56" Length
Star Rating
-
Prime Status
-
Preview
Baileigh BS-250M Hydraulic Horizontal Mitering Band Saw, 110V, 1.5hp Motor, 1" Blade, 8.93" Round Capacity
Product
Baileigh BS-250M Hydraulic Horizontal Mitering Band Saw, 110V, 1.5hp Motor, 1" Blade, 8.93" Round Capacity
Star Rating
-
Prime Status
-
Preview
3 Speed!!! 1 HP 4 in. x 6 in. Horizontal Vertical Metal Cutting Band Saw FEDEX
Product
3 Speed!!! 1 HP 4 in. x 6 in. Horizontal Vertical Metal Cutting Band Saw FEDEX
Star Rating
-
Prime Status
-
Preview
SHOP FOX W1715 3/4 HP Metal Cutting Bandsaw
Product
SHOP FOX W1715 3/4 HP Metal Cutting Bandsaw
Star Rating
-
Prime Status

View Our 8 Reviewed Horizontal Band Saws for Metal Cutting, Below-

1. KAKA BS-712N || 7-inch Metal Cutting Horizontal Band Saw

KAKA 7-inch Metal Cutting Horizontal Band Saw

Versatility chopping- Shocked by KAKA’s home depot form as a metal cutting horizontal band saw production? We also get shocked by innovation. Many customers ask about the specialty and why so being thankful to them. Well, it is about the versatile chopping settings from the toolbox of the BS-712 series.

Heavy power- As we found a high capacity to rip 7” x 12”, similar to the previous vertical/horizontal band saw for metal cutting. Including steel, aluminum, and railroad bars. Sounds powerful two-in-one, right? 

Different speed blade- Featuring a 4-speed blade is another plus point to elevate your task mode. This electric horizontal band saw enables quick cuts in numerous shapes. 

Powerful motor- Whether the motor is engineered 1.5 AMP, to tune in a perfect feed rate. Though a perfect feed rate of a metal cutting horizontal band saw relies much on quick clamps. You do not have to worry, because the Hydraulic feed roller will control your project angle at ease. 

Hassle-free- Forgot about the portable wheels. That secures transportation of your band saw like clamps do metal at fixed places. By instant rotating from 0 to 45 degrees. At last, the product dimensions 50” x 20” x 45” and 350 pounds give a breeze while working with the notch. 

What We Liked

  • Designed for high portability;
  • Instant changing cut-off angles;
  • Act both vertical and horizontal modes.

Disliked

  • Hefty priced;
  • Hard to find the wheel’s cam lock.

2. Jet HBS-916W || 9” x 16” Horizontal Band Saw for Metal Cutting

Jet HBS-916W Horizontal Band Saw for Metal Cutting

Perfect design- The 2nd one head is a horizontal band saw for metal cutting, empowered through a range of materials. Designed the most coolant system like a dry metal cutter concludes to protect your fingers. With a complete blade guide that will flow after the relaxation mode.

Smooth- From the JET series, this one comes up with a 9” x 16” rip capacity, works smoothly at one phase only. 

Great power capacity- Whether other ones have better swivel power, it can rotate only 0-45 degrees. An integrated tensioning system can sense the blade by the built-in gauge and large handwheel. In fact, you have a parallel ball-bearing supporting term.

Easy adjustable- Another advantage you can take up is the fully adjustable jaws hydraulic down feed or feed roller. 

Extra safety- That not only ensures the blade guard but an auto-shut-off/on valve also. Even if you protect yourself with extra equipment, it renders on its own.   

What We Liked

  • A coolant distribution system;
  • Guarded blade width;
  • Cast Iron and Steel;
  • Large handwheel.

Disliked

  • Unportable;
  • Not affordable.

3. WEN 3975T || 4-7/8-inch x 5-inch Band Saw for Metal Cutting

WEN 3975T Horizontal Band Saw for Metal Cutting

One of the best horizontal band saw- Searching for a solid horizontal band saw, can cut i-beams too? The right solution with a 6” stand from WEN 3975 series, we have included in our listing.

Flexibility- Integrated beveling blade from the toolbox offers to cut-off anything from 0-60 degrees. 

Easy adjustment- Whenever you go to install your hand picked material on the table, adjust at an exact angle until you give it a proper sizing. Whether it is a metal pipe up to 5” or has rectangular sizes up to 5 x 4-7/8 inches.

Speed control- Variable speed operation permits for blade rotation anywhere from 125 to 260 feet per minute to ensure the perfect cut on a range of sizes and materials. Even you can cut off more than a 24” metal at a single pass with a 2-speed blade of 125/260FPM.

Easy to carry- Comes up with a storage and transport mechanism. That helps to move it to your desired places. The ball bearing guides allow a reliable operation to get along for a long time. 

Long-lasting- Also, it provides a long life span by sensing the blade tension system. Even if the tilting knobs tweaks between jobs with a strong grip on your workpiece. 

What we liked

  • 2-speed blade;
  • Affordable;
  • Simple storage.

Disliked

  • Little problematic ball bearing.

4. SHOP FOX W1715 Band Saw for Metal Cutting

SHOP FOX W1715 Horizontal Band Saw for Metal Cutting

Suitable for all kinds of projects- Introducing another excellent horizontal/vertical band saw from SHOP FOX manufacturer. Use this economical tool from smaller to larger projects as long as you can.

Three-speed blade- What makes it more economical and separate from others? You will find the answer in its mobile base and 3-speed blade specialties. Its built-in mobile base provides a simple storage system at the corner of your workshop.

Easy blade replacement- Also, the mobility will help to transport from here to there. Including the V-belt replacement option to change the 3-speed blade 78/108/180 FPM. So, you can change the speed after a stock variety of hard metals.

Versatile cut- W1715 sets up super straight cuts, as in vertical positions through the entire piece. Of course, who does not want such a pattern and curvy shapes at a single pass?

Extra facility- If you want more precise cuts at a horizontal position, turn on the stop switch if you wish to do it or want consistent results. The saw includes parts to line it up vertically, and it does work that way, but if you would like a vertical saw I suggest you purchase something that’s intended for it.

What we liked

  • Adjustable from 0-60 degree angles;
  • Ball-bearing construction;
  • Wheels and handles for portability;
  • Easy to get slower and faster feed rate;
  • Automatic shut-off.

Disliked

  • Better for light manufacturing;
  • Flimsy base.

5. Prolinemax 4×6 Horizontal Vertical Metal Cutting Bandsaw

Horizontal Metal Cutting Band Saw

Suitable size- Are you looking for a small workshop manufacturing horizontal metal cutting band saw? Prolinemax produced such a small rip capacity 4” x 6” rectangular base, for wood, plastic, steel, and tubes at the same time.

Great blade and motor- Even the blade speed and sharpness will amaze you while operating. The blade remains sharp whether you have to cut 200 pieces of metal pipes or more than that amount. The rapid action from rapid speed does not overheat the ¾ AMP motor either.

Heavy duty with necessary facilities- The attached metal stand will give you a minor flimsy mode. However, it works well while keeping your workpiece on the swivel, to vise up 0-55 degree angles with a blade. A satisfactory level comes when you have a firm grip on the handle to fix everything in a tilting position. Availing enough gravity feed rate can satisfy you more when you have it by releasing tension from the spring by twisting the handle.  

What we liked

  • 3-speed blade;
  • Small workshop-based;
  • Affordable;
  • 4.5 cutting capacity;
  • Suitable for all materials cutting.

Disliked

  • Nothing is found but some users claim that the price is a little bit higher than similar category tools.

6. Baileigh BS-250M || 8.93″ Hydraulic Horizontal Mitering Band Saw

Baileigh Hydraulic Horizontal Mitering Band Saw

Different material- Any horizontal band saw heads, to cut-off aluminum and sturdy alloy mitering up to 60 degrees? It is worth mentioning that this one enabled such a mechanism on its own.

Different speeds for different materials- Some other features from BAILEIGH make it stand out. First, with a built-in inverter-driven 2-speed (66/280) blade, you can adjust for several material types, like faster speed for aluminum and brass types and slower for hard ones. 

Easy angel cut- Even this single miter band saw lets you cut angles around 9” round hard stock within a second.

Industrial use- But if you are worrying about tidying up your workspace. We suggest you not do so. Because this one includes an industrial-grade coolant pump, it collects all chips in it during operations.

Strong and sharp blade- Besides, it keeps the blade teeth cool and lubricated for long-lasting usage with a 1.5 HP motor. 

Powerful motor- Another engineered 3 HP motor from the gearbox, used to drive the inverter for non-stop production. If you want to control production run, two ways are integrated most. One is to turn on the hydraulic roller and the second is in two steps. At first, pull down the arm, then trigger the switch of the coolant system.   

What we liked

  • Blade guide: carbide by roller;
  • Square, round, and rectangular rip capacity;
  • Chip tray;
  • Quick changing service for mitering angle.

Disliked

  • Small footprint.

7. Dake SE-712 || 21″ x 56″ Standard Duty Horizontal Metal Cutting Band Saw

Dake SE-712 Standard Duty Horizontal Metal Cutting Band Saw

Safety- Last but not least. This horizontal band saw with stand, comes up with the most safety interlock function, worth its title. Other practical safety integrated systems attached from the manufacturer DAKE. Including a metal coolant pump, chip tray, and obviously the hydraulic control bar.

Versatile use- Suitable for medium The coolant pump not only makes your workpiece dry but the blade also. Even the heavy steel base floor stand offers such big deals while operating medium-duty applications. Like copper alloys, hard brass, bronze, stainless, and some carbon-molybdenum-nickel alloy steel.

Speed control- With a 4-speed blade of 85, 130, 180, and 235 feet per minute (fpm).

Anti-vibration- Besides, the anti-vibration bed 9” x 21” enables better cuts to the top-mounted edges. 3/4 inch blade width enables the wheels of the saw to form straight or curved cuts during a range of materials. If you want to control your feeding rate, the hydraulic controller allows you to do so at variable rates. In fact, by locking the system, according to the height and scale of tasks.

What we liked

  • Swivels up to 45 degrees;
  • Low voltage reset;
  • Thermo overload protection.

Disliked

  • ¾ HP motor;
  • Quick rusting out.

8. JET 414459 HVBS-7MW || 7-Inch Horizontal Band Saw for Metal Cutting

JET 414459 7-Inch Horizontal Band Saw for Metal Cutting

Portable- Starting with the most popular version from JET makes its way out. We are very grateful for this portable highbred bandsaw. For coming with prior vertical/horizontal functions, only for cutting metals.

Produce much power and best performance- This metal cutting horizontal band saw acts quite similar to a vertical bandsaw to customize your workpiece, as it remarked in its title. As well as it rises up to 45 degrees at a rapid single phase, even at rush hours, like the best horizontal band saw for metal cutting for money. 

Great mechanism- The built-in adjustable mechanism stops you while it becomes very hard to continue.

Four different speeds- Another popular feature that cheered us up is the manual blade speed settings until you use proper blades at 4-speed. Like 85, 130, 180, and 285 SFPM, according to your metal samples. Kind a thumb of rule, the harder the metal works well at slow feet per minute. With a perfect rip capacity of 7 x 12 inches smooth.

Durable- Featuring cast-iron is such a fine and perfect making for durability. This machine ensures the best quality and durability.

Auto shutoff technology- If you get closer, you may see a coolant system with an auto-shutoff option. This remains your workpiece cool during the heavy workload. But it is mandatory to read an adjustable roller blade guide. To accommodate different materials with a chip tray under the roller to free up your workspace.

What we liked

  • Flexible;
  • Perfect control over each project;
  • Sturdy construction;
  • ¾ powered motor.

Disliked

  • Heavy to transport;
  • Expensive.

Buyer’s Guide – Horizontal Band Saw for Metal Cutting

Portability

The most desired issue that a potential buyer looks for is the horizontal metal band saw. As it comes with portable wheels, cam locks have a secure movement. It does not matter wherever you want to move the band saw, around the shop or inside your garage, and at job sites.

Read more: A Buying Guide for Tile Saws

Sometimes it seems to create problems with 4-wheelers instead of 2-wheelers. Without cam locks, such portable models can roll away by themselves anywhere. Ensure the wheel locks while buying the toolbox. If it is not available, find some other way to secure the machine’s portability.

Table 

How about the table of a horizontal band saw? It matters even for a benchtop bandsaw. Without the heavy-duty table bed, you have to struggle for an efficient straight or curvy cut. In case of repeated chops, you should have more efficiency, to vise up at different angles. While buying, make sure the table height that you can adjust and provide comforts, the scaled works in extended periods reciprocate your saw blade’s speed. As well as a reciprocating saw does.

Power

We are talking about the power of the engineered motor of metal cutting horizontal band saws. Plenty of motors come up with X-torq size. Almost all have equivalent power, for instance, 1.5 HP, 1 HP, ¾ HP, and so on. But some countries take into account the power VOLT limit. Some tend to limit 115 VOLT, or some exceed the range like 230 VOLT—notice which limit you want to start your crafty projects or the professional ones.

Cutting Angles

If you take into account the blade speed feature, you should consider the cutting angles. Except for several manufacturers, modern ones are providing from 0 to 60 degrees, even more than this of mitering angle and chopping down proficiency. So you should check if it is worth money as a potential buyer.

An added remarking feature in its mechanism is how angles should change while dealing with a big or small project. Remember, the quicker the vice releases up, the better the horizontal band saw is.

Safety Features

All important safety functions you may not find while evaluating a horizontal band saw at stores. Some manufacturers may attach blade guides, coolant pumps, safety switches, and hydraulic bars too.  

The guide enables us to have a precise and smooth cut, with an easy to adjust feature to fix your workpiece at the proper place.

The coolant lubricant not only hinders the overheating of the blade while moving, as well as the machine. This integrated method supposed to keep the metal cool before and after ripping by the band saw.

The safety switch keeps the saw apart from being in an auto-engagement with power. So you do not have to worry while comforting yourself in-between the task.

People Also Ask

How do I select a bandsaw blade?

Choose the widest blade possible formed on the cuts you’ll be making. When cutting curves, the blade’s width will determine the tiniest radius that will be cut. Smaller width blades are used for more minor radius cuts, while larger width blades are most frequently reserved for resewing or near line cuts.

Horizontal Band Saws vs Cold Saw

Sometimes people are confined to choice brand saw or cold saw. Let’s know some basics about this matter. 

Horizontal Band SawsCold Saw
Ability to work with versatile materials.Cut different kinds of materials.
Basically, use for the heavy-duty project because its produce high energy,Suitable for the medium-duty work project.
It has a hardened tooth blade.Round dish shape tooth blade.
Brand saw produces rougher finishing.Cold saw provides a fine finish.

Final Thoughts

The above-described metal cutting horizontal band saws are trendy and competing with each other. We know that you want to run with the trend as well everyone does. Are not we right?

Pic the KAKA BS-712N, if you want to use the overall best horizontal band, saw for your project. If you need industrial use horizontal band saw then the Baileigh BS-250M. Its industrial use heavy-duty best quality brand saw. 

Yeah, but before buying one in-store, remember the considering points. For instance, pricier side, adjustments, user-friendliness, and extra features. Hope the best for having the right decision.

You Might Also Like:

About Gavin Ford

Hi, I am Gavin Ford. I am a full-time power tools salesperson and a part-time mechanic. I help my friends and neighbors with their tools. Which one to buy, how to buy it, how to use it, methods to fix broken tools, and so on. In I will do the same for the rest of the world. You will get everything you need to know about tools for regular and professional use.

Leave a Comment