Best Nailers for Siding 2021 – How to Choose It

You need the siding nailer at the off chance that you consider starting siding. The advantage of siding nailers is that it can be utilized very well on fencing, sleighing, decking, surrounding, etc.

As it is, you will be able to understand precisely how to choose one of these nailers, the ideal model to use, and how to determine what type of pneumatic nail you really need.

So whether you are a beginner contractual worker, you need a siding nailer. Thinking about the top siding nailer purchase guide, we’ve seen the time you need to pick the best one.

Siding Nailer Details

Siding nailers are far more lightweight and maneuverable. You’ll use them in an upright position. You’ll also adjust the depth of the nail that you simply insert within the siding. there’s a protective piece on the simplest siding nailers that forestalls you from indenting or damaging softwood like cedar.

If you’ve got experience employing a framing nailer, you ought to know that using a siding nailer may be a bit different. A siding nail gun is not any replacement for a brad/finish nail, which is explicitly employed to handle delicate materials, attaching them without breaking them. While these nailers that affect a smaller gauge nail are used for smaller carpentry jobs or indoor jobs, the siding nailer is handier for bigger jobs.

You use a siding nailer once you need a more delicate touch than a framing nailer can provide, but a much bigger nail than what a finish nailer can fire out. It’s essentially designed to fill that in-between role.

Comparison Table

Preview
Overall Best
BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)
Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth...
Makita AN611 2-1/2" Siding Coil Nailer
Metabo HPT Coil Siding Nailer, Siding Nails 1-1/2 inch To 2-1/2 inch, Side load, Tilt Bottom Magazine (NV65AH2)
Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2)
DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing Nailer
Product
BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)
Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth...
Makita AN611 2-1/2" Siding Coil Nailer
Metabo HPT Coil Siding Nailer, Siding Nails 1-1/2 inch To 2-1/2 inch, Side load, Tilt Bottom Magazine (NV65AH2)
Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2)
DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing Nailer
Star Rating
-
-
-
-
-
-
Prime Status
-
-
-
Overall Best
Preview
BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)
Product
BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)
Star Rating
-
Prime Status
Preview
Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth...
Product
Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth...
Star Rating
-
Prime Status
Preview
Makita AN611 2-1/2" Siding Coil Nailer
Product
Makita AN611 2-1/2" Siding Coil Nailer
Star Rating
-
Prime Status
-
Preview
Metabo HPT Coil Siding Nailer, Siding Nails 1-1/2 inch To 2-1/2 inch, Side load, Tilt Bottom Magazine (NV65AH2)
Product
Metabo HPT Coil Siding Nailer, Siding Nails 1-1/2 inch To 2-1/2 inch, Side load, Tilt Bottom Magazine (NV65AH2)
Star Rating
-
Prime Status
-
Preview
Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2)
Product
Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2)
Star Rating
-
Prime Status
Preview
DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing Nailer
Product
DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing Nailer
Star Rating
-
Prime Status
-

View Our Top 7 Nailers for Siding, Below-

We choose 7 different nailers for siding to reduce your analysis job. Let’s take a glimpse of those-

1. BOSTITCH N66C-1 Nailer for Siding

BOSTITCH N66C-1 Nailer for Siding
  • Power Source: air-powered;
  • Weight: 4.08 pounds;
  • Feature Element: Unit Instruction Guide.

Exact, dependable, lightweight, and incredible worth. The primary way that the Bostitch N66C-1 could be better was by eliminating the client’s chances of error by increasing its footing and completion.

It rarely happens, and can really deal with most shapes really well. Letting you work for extended periods without weakness. It is light enough and is nothing more than a bank buster. In fact, we feel that at the higher end of its price range. It is incredible depending on what you want.

This is an extraordinary siding nailer. So unbelievable, truth be told that we have given it our top picking position.

Pros

  • Flexible;
  • Great value;
  • Doesn’t jam;
  • Lightweight.

Cons

  • Should physically change out the fire component.

2. FREEMAN PCN65 Coil Siding Nailer

FREEMAN PCN65 Coil Siding Nailer
  • Magazine Capacity: 200 – 400;
  • Operating Pressure: 70 – 110 PSI;
  • Nail Size: 1-1/4″ to 2-1/2″ length with .090” – .113” diameter;
  • Weight: 5.3lbs;
  • Material Use: Magnesium with heat-treated steel parts.

Freeman PCN65 siding nails and a side stacking magazine that’s straightforward. Magazines range from 200 to 400 latches and clients can choose between plastic and wire lists. It allows clients to change the subordination of their acquisition needs.

Tough, this model is made of aluminum so that it is lightweight. The unit fits nicely into the client’s hands and offers the opposite of the ease of vibration.

It additionally supports their item with a one-year guarantee, so it’s a concept that’s guaranteed to last long. Incense can turn 360 degrees, yet incense is hard to turn from a decent and awful perspective.

In addition to this, it has developed a sturdy, lightweight pneumatic nail that provides straight magazine housing for a simple survey.

Pros

  • Better than a dollar value;
  • Works with a wide range of nails;
  • Safety trigger lock.

Cons

  • Air pressure issues.

3. Makita AN611 Nailer for Siding

Makita AN611 Nailer for Siding
  • Magazine Cap.: 200-400;
  • Nail Sizes: 1-1/4” to 2.5”;
  • Depth guide: 9 settings;
  • Weight: 5 lbs.

With the Makita AN611 power, highlighting the three-mode determination, there is also a built-in air channel for remnants and flotsam and jetsam minimization, even multi-directional fume ports to take the client away from the client.

This is an excellent quality model that is increasingly expensive, yet to claim the reputation of a reputation nailer, it does not overcome it. Usually, light and over the top, we could see that this nail was a breeze to use and contained a significant number of extra highlights. Remnants and trash are never a problem due to the inherent air channel, and the smoker port can be moved 360 away; any need to strain your face when working.

It was the strongest model we have had the pleasure of using at any time. You even have the option of using siding nails with a length of 1-1 / 4 “- 2-1 / 2-inch. When you balance the profitability settings, you will have the option of using this model most of the time for a long time continuously. With no stacking and a jam-tool, it is an ideal pneumatic nailer for developer workers and home clients.

Pros

  • Slight issues with air exhaust;
  • Touch builds;
  • Exact firing and depth guide

Cons

  • Expensive.

4. Hitachi Coil Nailer for Siding

Hitachi Coil Nailer for Siding
  • 1 ½ inch to 2 ½ inch nail length support;
  • Air Pressure 70 PSI to 120 PSI;
  • Drive 3 nails per second of 2 ½ inch length;
  • Weighs 4.8 pounds.

The Hitachi NV65AH2 develops a wide range of severity devices, including various pneumatic siding nailers needed to be developed.

When using this siding nailer for development, you get similar 1 ½ inch – 2 ½ inch long nail support. Being a pneumatic apparatus, these nails can drive a lot of hard work. The client has to attach an air blower with a continuous operational aerial tension from 70 psi to 120 psi. Once this is done, you run 2 ½ inch nails at a fast speed of up to 3 nails for each subsequent, saving a lot of time for the client.

​It is more close to it by the incredible form of quality, which is remarkably regular, despite being exceptionally solid and sturdy, weighing only 4.8 pounds, which is very average for the proposed display.

Pros

  • It’s a portable design;
  • Highly reliable;
  • Better performance.

Cons

  • Expensive.

5. Metabo HPT Coil Nailer for Siding

Metabo HPT Coil Nailer for Siding
  • Weight: 4.8 pounds;
  • Power: corded-electric;
  • Model No: NV65AH2.

Metabo HPT introduces Tools, which is essentially a rock-solid force device and hardware. From now on, its buyer grade siding nailer is very ground-breaking and solid.

This siding nailer is now available in the third case. It could very well be another incredible choice. On the off chance, you are looking for an exceptional ground-breaking pneumatic nail. You can utilize this siding nailer for nails 1 ½ inch to 2 ½ inches in length. These can be either plastic sheet tested nails according to your requirements and prerequisites.

Another incredible thing about this siding nailer is that it allows you to change the inability to use the free modification of its materials effectively. This is very convenient when using 16-degree wire tested curl nails for siding.

What’s more, since it’s an aerodynamic side nailer, you have to attach it to an air blower to use it. Concerning aerial tension, it can operate from 70 PSI to 120 PSI without any problems.

Pros

  • High-performance;
  • Ergonomic model;
  • Simple adjustment.

Cons

  • Expensive;
  • The power of short magazines.

6. DEWALT DW66C-1 Siding and Fencing Nailer

DEWALT DW66C-1 Siding and Fencing Nailer
  • Weight: 9.2 pounds;
  • Model No: DW66C-1
  • Power: corded-electric.

This is a DeWalt DW66C-1 nailer that is lightweight, with aluminum lodging. The drive wire welds and the plastic embedded loop nails, and most of the fine material is excellent for seeding and surface. Pneumatic, which suppresses the work of any air blower and 70-120 psi.

Although these nailers are related to air blowers, you can reach them anywhere. Their additional favorable position is that they give a consistent torque, are not at risk for controlling deficiencies like electric units, or are fueled like fuel-controlled units.

Another preferred location of pneumatic nailers is their lifespan due to the low moving parts.

Pros

  • A magazine for 300 nails;
  • Tool-free adjustable;
  • Tool-free adjustable rafter hook;
  • Durable, lightweight aluminum housing;
  • Tool-free depth of drive adjustment.

Cons

  • No cons.

7. Max USA Corp. (CN565S3) Siding Coil Nailer

Max USA Corp. (CN565S3) Siding Coil Nailer
  • Weight: 5 pounds;
  • Material: Metal, plastic;
  • Power: Air Powered.

This model may be a top of the road professional-grade pneumatic siding nailer. It’s employed for sheathing, subflooring, roof decking, exterior deck, siding, fencing, exterior trim, furring, and strapping jobs. A no-mar contact tip is included with this tool.

With numerous available today, it knows to have a reputation you’ll trust. This is undoubtedly that and can be an excellent acquisition. 

For this reduced price, this is widely recommended and maybe a regular choice amongst most people. Max USA Corp has included some excellent touches, and this equals great value.

Pros

  • Worth the price;
  • Good quality;
  • Powerful & easy to use.

Cons

  • None.

What to Look While Buying a Nailer for Siding?

Currently, we are fully acquainted with the nailers on the market. Thus, the following are the highlights of the stage that will make your gadget the right choice for you. Here are a few highlights to follow when it comes to the right siding nailer for you.

Read more: What Kind of Nailer do You Use for Hardwood Floors

Durability

The opportunity to make the gadget out of potential lodging will serve you in the long run. It is fundamental for any nail to grow entirely metallic to be strong. In most cases, aluminum and magnesium are the products that make this gadget firm and light in their hands.

Performance and Speed

You need a nailer that plays out your activity in less time with perfect efficiency. In most cases, different types of wood are used in siding development when talking about siding. The wood may extend from softwood, hardwood, and sometimes to concrete and steel. A decent nailer should play evenly on all surfaces without any problems.

Furthermore, the presentation is astonishing and as fast as the nail surrounds. The nails are dependent on the speed of the nailer. In that, a limiting activity is required to satisfy both criteria when siding cannot occur. Depending on the siding, you need a nifty gadget with moderate speed, which can damage a lot of siding material.

Flexibility

Flexibility should be your top requirement. Obviously, you need your gadget to serve you with different capabilities at once. It buys that basic thing when purchasing a gadget, not to mention a nailer. The nail size of 1-1 / 4 inch to 2-1 / 2 inches after talking up to the nailer is usually ideal for siding work. The flexibility of the nails that suit the suit is deeply subject to flexibility.

Read more: How do I Choose a Finish Nailer

For example, a nail should force two plastic ordered nails and the nails involved in the wire—another element of an excellent magazine limit. If a nail and magazine limit is acceptable, a nail will probably give you better results. There is a medium-short magazine limit on the off chance that any nailer suits different types of nails, but this is of no use.

A nailer should combine two types of nails, and likewise, a great magazine. Magazine limits of up to 400 are seen as sufficient for nailers.

FAQs

What Do Quite Nails One Use to Hold Vinyl Siding?

Use electro or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8″ and a nail head of 3/8″ or larger. The nails should penetrate 3/4″ into a solid wood base.

What’s the Difference Between a Roofing Nailer and a Siding Nailer?

The main difference between these nailers is roofing nailers actually used to do a roofing job like nailing shingles. On the other hand, a siding nailer is employed to try a siding job like woodworking.

Can I Use a Siding Nailer for Fencing?

Siding and fencing nailers are recommended for decking, siding, fence boards, pallets, sheathing, and subflooring.

Last Verdict

You need a siding nailer. The way it is utilized for storage makes it one of the most important devices on your device’s chest.

So if you are in the market for a top siding nailer, I recommend any of the above tests. This is my top pick from 1-3 / 4 inch to 3-inch coil siding. It has amazing highlights that will make your work time fun.

Remember to wear well-being apparel when you work the nailer.

So happy, nailer!

Relevant Resources:

About Gavin Ford

Hi, I am Gavin Ford. I am a full-time power tools salesperson and a part-time mechanic. I help my friends and neighbors with their tools. Which one to buy, how to buy it, how to use it, methods to fix broken tools, and so on. In I will do the same for the rest of the world. You will get everything you need to know about tools for regular and professional use.

Leave a Comment