8 Best Oscillating Spindle Sanders Analysis for 2021

Tired of applying worn-out grit sandpapers by rubbing away at small crevices or a large wooden piece? Well, we prefer an oscillating spindle sander, as well as the pro-choice too. 

The design, as well as the specs, only beyond your imagination for sanding down. On a flat tabletop or like a metal belt sander, such tools give a smooth finishing on detailed edges. This varies with portable and non-portable forms, rather than in specific forms, like benchtop, tabletop, hand-held, and floor models. Among these, benchtop and hand-held are quite well enough to move around though offers itself for neat storage. 

The spindle sanders often oscillate drum rotation movement up and down, run by powerful motors, and sometimes deliver noisy operations. Instead, a hand-held one is preferable but unable to provide perfect strokes per oscillating minute. However, the spindle sanders are quite easy and steady, whether in format changing or moving around.

As a result, the static friction stopping by the greatest movement enabled oscillating spindle sanders are overwhelming in stores in terms of size and functionalities. Thus, good research can keep one on an afterward track. Before investing worthy bucks, won’t you like to have a close look and comparative study?  

Our Top Picks at a Glance

Preview
Overall Best
WEN 6510T 3.5 Amp Oscillating Spindle Sander,Black
Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange
JET Bench Oscillating Sander, 7.5 A
Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander
WEN 6524 Oscillating Belt and Spindle Sander
Product
WEN 6510T 3.5 Amp Oscillating Spindle Sander,Black
Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange
JET Bench Oscillating Sander, 7.5 A
Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander
WEN 6524 Oscillating Belt and Spindle Sander
Star Rating
-
-
-
-
Prime Status
-
-
Overall Best
Preview
WEN 6510T 3.5 Amp Oscillating Spindle Sander,Black
Product
WEN 6510T 3.5 Amp Oscillating Spindle Sander,Black
Star Rating
-
Prime Status
Preview
Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange
Product
Triton TSPS450 3.5Amp Cast Iron Top Oscillating Spindle Sander, Orange
Star Rating
Prime Status
Preview
JET Bench Oscillating Sander, 7.5 A
Product
JET Bench Oscillating Sander, 7.5 A
Star Rating
-
Prime Status
Preview
Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
Product
Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
Star Rating
-
Prime Status
Preview
WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander
Product
WEN HA5932 5-Amp Variable Speed Portable Oscillating Spindle Sander
Star Rating
-
Prime Status
-
Preview
WEN 6524 Oscillating Belt and Spindle Sander
Product
WEN 6524 Oscillating Belt and Spindle Sander
Star Rating
Prime Status
-

How to Select an Oscillating Spindle Sander? 

While you are a carpenter, or a precise woodworker, needing an oscillating spindle power sander is not an uncommon matter, right? Though special specifications are required while using it for thorough sanding. More precision that makes sense while shopping for it by considering the coolest facts. 

Model Basic

This first and foremost shopping fact is like starting from the basics. Whether dimensions and weight are natural is because portability is the main factor. But model basics, like benchtop and tabletop and some other patents known as a standard for well-done jobs within time. As in, most of the benchtop comes with less strain, but you can deny the super changing and good portability through the tabletop units—for example, WEN 6510.

However, we have chosen easy and lightweight spindle sanders for decreasing strains and hand fatigue, as you can see on the first 7 terms. However, these models provide stability; in fact, fewer vibrations. Instead of typically making material pinpoint in consideration, choose by the less strained on offer ones.    

Motor Capacity

Another criterion you should remember is the motor capacity. Well, as long as these heavy machines provide similar heavy and powerful motors, that is typically engineered before starting and having smooth operations. In general, most of our experienced spindle sanders were common while running from .5 to 1 HP and 3.5 to 5 AMP. This means the greater speed it can go through, as in, spindle speeds up to 2000 RPM. 

Also, withstanding a greater workload means to have more compatibility with bigger drum size and supporting workpieces. However, the engineered item gets importance providing good stability. In between works, or while operating, noise creating is quite popular with the high spinning motor, but the opposite can happen, for instance, Shop Fox W1831

Easy Changing

Creating beautiful edge lines as per your need is nothing irregular for oscillating spindle sanders. Yet, shifting out the attachments at ease, like sleeves, from benchtop to tabletop, grit types and sizes, and similar things quite matter a lot. Let not make it very complicated, yet some manufacturers with their modern patents do not seem to make its way very clear.

But some other well-established brands seem to make it very different, yet easy. In that way, sleeves should slip onto the size of the expected drum at ease. In that way, by the locking mechanism, you should lock your workpiece and effortless drum placing, and should remember while shopping for the sander.   

View Top Oscillating Spindle Sander Reviews, Below

For the simplest sanding purposes and in woodworking projects, even at frequent times, below enlisted top-notches oscillating spindle sanders are great without issues.

1. Triton TSPS450 3.5Amp Oscillating Spindle Sander

Triton TSPS450 3.5Amp Oscillating Spindle Sander
  • Weight: 34 pounds;
  • No Load Speed: 2000 RPM; 
  • Table size: 14-1/2″ x 11-1/2″;
  • Oscillation per minute: 58;
  • Motor: 3.5 AMP.

From the right size, quality, and grit sandpaper to the enhanced material support, what not we have found in this bench unit, except for tilting. Featuring a machine like this, including 6 different spindle diameters is a breeze. 

As we have experienced, unlike other models, weighing with this much high optimizing features is very rare. As it lets itself move around at ease by 2000RPM spinning capacity, it keeps oscillation concerning till it reaches approximately 58. Other reinforced features, such as non-vibration, even while continuing or starting the motor with 3.5AMP, not a big deal. 

Not only that, a big dust port around 4”-5” automatically runs with the unit to apply no-time cleaning. In fact, we get surprised with its innovative washer for each integrated drum. However, instead of 6 spindle diameter fixing, it has shown us only 3, as if, slightly confusing though it adapts all the mentioned sizes. 

What we liked

  • Six sandpaper sizes and drums;
  • Quick change tool;
  • Onboard storage;
  • Quiet operation;
  • Big dust collection port;
  • 58OPM.

Disliked 

  • Nothing noticeable.

2. JET 708404 JBOS-5 Benchtop Oscillating Spindle Sander

JET 708404 JBOS-5 Benchtop Oscillating Spindle Sander
  • Weight: 82 pounds;
  • Table tilting: 45 degrees;
  • Spindle diameter: 5.5”;
  • Motor: .5HP;
  • Oscillating stroke: 1”;
  • Oscillation per minute: 30.

Compared to the previous oscillating spindle sander, different from the shape and a bench unit similar to a benchtop drill press for metal. From the middle of the road, we have experienced something great which has reinforced functionalities on offer. Size, stability, oscillation power are some examples.

For performing well in this categorized competition, runs by delivering 30 strokes with 1” optimization. A 7.5AMP AC direction powered motor leaves no stones unturned in that case. Whether lifts and lowers, as well as tilts enough remembering the workpiece. As a result, from .25”-2” 100 grit papers capability proves its decency. 

Non-marring with skid rubber feet and an adjustable cast-iron table to the 18.75” height make it much compatible. However, a 4” dust port is a breeze for the fastest cleaning. 

What we liked

  • Adjustable table;
  • Lifts and tilts;
  • Durable;
  • Non-skid rubber feet;
  • Less maintenance ball bearings;
  • 5 spindle accommodation.

Disliked 

  • Only for heavy-duty jobs.

3. Shop Fox W1831 Single Phase Spindle Sander

Shop Fox W1831 Single Phase Spindle Sander
  • Weight: 30 pounds;
  • Spindle diameter: 3/4″ to 3”;
  • Drum size: 4.5”;
  • No Load Speed: 2000 RPM; 
  • Sanding sleeves: 6 (.5” to 3”).

Looking for something different in this category? Step forward with single-phase oscillation provider Shop Fox W1831. In short, a workhorse that is going to surprise you more. Since the .5HP and 3.5AMP motor let itself spin at 2000 RPM, surprises are more right than before.

Unlike other models, it shows a greater convenience than a butter smashing performance. Although the specs are not that much different than our first headed one, rather fab for casual woodworkers. Nonetheless, you should have a concern with its upgraded built-in qualities. Performance-wise, its solid cast-iron is too much straight for both, pressuring much and stability for every perfect job done. To easy cleanup, dirt and debris cleaning dust ports are there in-built. However, in that case, you will have to spend little bucks to have a proper connection. Around six drums of 4.5” each and grit papers in total, along with separate attachment indicators will remove your previous confusion. 

What we liked

  • Durable metal construction;
  • 6 sanding drums and sandpapers sleeves provided;
  • 3 spindle washers;
  • Powerful motor.

Disliked 

  • Louder sounds while operating;
  • Flimsy components. 

4. WEN HA5932 Portable Oscillating Spindle Sander

WEN HA5932 Portable Oscillating Spindle Sander
  • Weight: 6.64 pounds;
  • No-load speed: 1800 to 3200;
  • Oscillation per minute: 50 to 90;
  • Motor: 5AMP;
  • Drum size: 1.5” to .75”;
  • Oscillating stroke: .25”.

This portable oscillating spindle sander comes with a wide range of spindle speeds as per project size and strength for sanding down. Means to sand down all those complicated curves that you cannot do with your single hands at once. 

In brief, equipped with a 1HP and 5AMP powered engine at 2 variable speeds, let the belt spin ranging between 50-90 OPM. Sounds powerful and convenient, right? We had experienced so, but the no tilting option had disappointed us earlier. Right now, an easy transformation from handheld to bench unit by using the mounting hardware is a relief for us. 

Including an easy clamping, you must cheer up with less than 4 drums, whether similar 80-grit categorized sandpapers create a mess for domestic users. Though it is small, it always reaches confined areas for particular jobs. 

What we liked

  • Hard-to-reach compatibility; 
  • Different sanding sleeves and speed;
  • Very handy;
  • Portable and easy transforming.

Disliked 

  • Found nothing. 

5. Jet 723950 Floor Mount Oscillating Spindle Sander

Jet 723950 Floor Mount Oscillating Spindle Sander
  • Weight: 216 pounds;
  • Table tilting: 45° front and 15° back, and 90° quick index;
  • Spindle diameter: 4 inches;
  • Drum size: 9”;
  • Oscillating action:  2 1/2″ (vertical);
  • Material: Cast-iron.

The deal starts with this largest oscillating spindle sander, particularly a vertical or floor sander, its kinky spindle diameter support. Though the greatest oscillating motion in a vertical position about 2.5” you will experience like us, could never stop from a further buying. However, it has a pre-attached 9” drum, supports not only numerous spindle diameters but also lets the position and height change as per your advantage. 

Though the shorter spindles may not have an acceptable mismatch, still 4” diameter suits, so far we liked it. Low and behold matter, such as short-turning around, may get 3-bids and another thing has happened after installing the 3” spindle. Suppose to run in a narrow line.  

What we liked

  • Underneath storage cabinet;
  • Floor model;
  • Dust sealed switch;
  • Five spindle sizes;
  • Precise ball bearings.

Disliked 

  • Too much pricey;
  • Weaker to hold the spindle straight.

6. WEN 6510T Oscillating Spindle Sander

WEN 6510T Oscillating Spindle Sander
  • Weight: 30.2;
  • Motor: 3.5AMP;
  • Table size: 15″ x 11-1/2″;
  • No Load Speed: 2000 RPM; 
  • Oscillating stroke: 5/8 inch;
  • Oscillation per minute: 58.

Out of the factory, its quiet operation capability and compact design make it outstanding from the regular oscillating spindle sander; however, rather fab to us. If creating short work of curves and contours, arcs, and odd shapes are your favorite causal woodworks, go ahead with it. 

All its reinforced washers, mandrills, 6 varieties suit 80-grits sanding sleeves from .5” to 3” can take your woodworks to the next level that is a way to turn yourself into a professional. Length of 5/8 inch vertical strokes at 2000 RPM and with a 3.5AMP heavy motor nonetheless can proceed with your working time without any fatigue issues. Also, these 6 easy-to-change drums that allow neat storages or holding on walls by the back hooks. 

Though its 1.5” dust extractor is the shortest in this list, moreover, it can drag you behind from the shop. Instead, you can integrate a new one around 3” to the vacuum compartment.  

What we liked

  • The quickest with optimal changing options;
  • Quiet to operate;
  • Compact design;
  • Back holder for neat storage.

Disliked 

  • Only for entry-level workers;
  • Weak plastic wrapper.

7. Triton TSPST450 Oscillating Spindle & Belt Sander

Triton TSPST450 Oscillating Spindle & Belt Sander
  • Weight: 28.44 pounds;
  • Table tilting: 0-45 degree;
  • Belt Size: 4″x24″;
  • Sleeve Height: 4-1/2″;
  • Oscillation per minute: 58;
  • No Load Speed: 1925 RPM.

Slightly different from the previous but similar manufacturer Triton. Equipped with a heavy motor, powered by 3.5AMP, with fewer spindle speed about 1925 RPM. Compared to the other features, TSPST450 has this less thing. 

Though we are going to brief, such as stability, larger workpieces support at any angle, precise sanding any edge. However, the edge ending you can sand by tilting from 0-45 degrees, which is not available in TSPS450. Including a larger cast iron table than the previous is a breeze, that a larger stock according to your range you want to size, is possible.

It is nothing cost-effective while speaking about only 5 different spindle sleeves and the same amount of matching rubber drums. However, you will get locating holes, but it is not usual for mounting your workbench.    

What we liked

  • Storage racks;
  • Neat storage system;
  • Larger cast iron table;
  • Well enough dust port;
  • Budget-friendly.

Disliked 

  • Fewer spindle speed;
  • Unsuitable for workbench mounting.  

8. WEN 6524 Oscillating Belt and Spindle Sander

WEN 6524 Oscillating Belt and Spindle Sander
  • Weight: 27 pounds;
  • Table tilting: 0-45 degrees; 
  • No Load Speed: 2000 RPM; 
  • Belt size: 4″x24″;
  • Sanding sleeves: 5 (.5” to 2”).

If you are a tabletop sander lover, go ahead with WEN series 6524. Even any bench you desire, you can transform it too. However, the deals are not spoiled yet, as it has been positioned as the last ones. It works great counter-clockwise for beautiful sanding. 

This combo pack comes with 5 varieties of sleeves, ranging from .5-inch to 2”. Well, we have considered it as poor whether other models are offering something ranging more. Some users often have complaints against this sleeve range, as if the 1” spindle was missing, applying as a rolling sander only. At this time, we never lost faith in using it. 

About a minute, only take the nut off from the top. Then the perfect belt assembly you will get in. However, it is better to install the drum and plate onto the spindle at the same time.  

What we liked

  • Fast switching from belt to spindle;
  • Durable metal construction;
  • Tabletop model;
  • Onboard storage;
  • Dual-action sander.

Disliked 

  • Little spindle sleeve missing;
  • Quite noisy;
  • Expensive.

Right Technique of Oscillating Spindle Sanders

An OSS may be an elementary machine that consists of a tabletop with a sanding drum protruding through a hole within the top. The drum is roofed with an abrasive sleeve, and also, as rotating, it moves up and down (oscillates). The oscillation ensures that a more significant area of the sleeve is employed, with the result that the abrasive won’t become clogged as quickly. The oscillation also eliminates the prospect that unevenness within the abrasive will cause a uniform scratch pattern along the workpiece’s length. 

An OSS can handle angled parts with ease, and it is that the innate pick when fairing an angle or sanding a curved edge. These sanders embark with an assortment of drum diameters to suit the maximum standard sizes of angles you’ll be working with. Once you are sanding, always select the most crucial drum to accommodate the littlest curve on your workpiece. Whether you’re sanding the sting of a plywood pattern or the sting of a final project component, bringing the work to the drum calls for the proper technique for a smooth result. 

For best results, it’s best to require long, flowing, light passes; bring the fabric to the sting of the drum as you progress it side to side and run it along the sting during a skimming motion, then pull it away at the top. Repeat this until you’ve got sanded to the road or refined the form to your needs. Trying to sand away the whole waste portion up to the road in one pass moving the fabric slowly over the drum will end in an uneven surface showing scalloped edges where the wood has assumed the form of the drum’s curve due to uneven feed pressure and speed.

FAQs

Is the Length of Dust Port Necessary?

Numerous woodworking toolkits, recognized as the best aftermarket ones, uphold a dust port. This counterpart corroborates in the fastest cleaning and improves the work surface at the same time. When it is time to plan to shape something that carries importance in your daily life, the debris is noticeable as these are from wood chunks. 

So, yes, we agree, and it makes sense that the length of a dust collector is vital. And in general, the models mentioned above may not have the most prominent ports on offer.  

How Emergent Is a 3” Drum?

It differs from the budget range between you and manufacturers. However, most low budget or kind of budget-friendly oscillating spindle sanders provide at least 2” drums. However, the enlisted models are quite different. As long as possible, these are offering both larger drums and budget-friendly sanders at the same time. 

If this has become the only separate issue, better save time and money by purchasing daily. Even these have come with longer and matching sleeves options. 

Can a Tilting Table Create the Importance of an Oscillating Spindle Sander?

Though each patent does not include it as an important one to differ while working and cost-effectiveness at the same time, we think it does. How? Well, sanding or creating curves on wooden plates or wedges at a particular angle matters, for instance, doing it on a flat table. 

Tilting table performs as cost-effective over these wooden projects, like over the wooden sine plates. As well, you can adjust the piece by positioning in a variety of provided degrees. Even some have indicators to keep on track. 

Final Notes

As if, varying degrees for creating varieties edge lines to the matching drums and including special specs are quite familiar to professional woodworkers while choosing good oscillating spindle sanders. But the opposite for newbies.  

A proper buying guideline and over that if you have enlisted top-notched models. However, luck by chance, we have organized it all by comparing overall functionalities.

You might also like:

About Gavin Ford

Hi, I am Gavin Ford. I am a full-time power tools salesperson and a part-time mechanic. I help my friends and neighbors with their tools. Which one to buy, how to buy it, how to use it, methods to fix broken tools, and so on. In I will do the same for the rest of the world. You will get everything you need to know about tools for regular and professional use.

Leave a Comment