Difference Between Marble Cutter and Circular Saw

If you are a craftsman, then it’s normal to have multiple tools like marble cutters and circular saws at your disposal. But, to fully utilize their benefits, you need to know which tool is perfect for which purpose, suitable? It is where we step in. 

In this discussion, we’ll make sure that you know the difference between the marble cutter and circular saw. Although these two machines might look the same to you, they aren’t the same. There’s a massive difference in usage protection, purpose, power, and strength between the two.

difference between marble cutter and circular saw

In the discussion below, for your convenience, we have laid down all the necessary information on how different they are. Just go through the whole debate in one fell swoop, and you’ll get a crystal clear idea of the core distinctions between them. So, let’s go!!

5 Major Differences Between Circular Saw and Marble Cutter

It is generally mistaken to think that these two tools are built for the same purpose. Because they both have a circular blade, people get confused and sometimes use one tool in another’s place. That’s why it’s essential to know the difference between them :

1. Purpose of Usage

A circular saw is used to cut wooden or relatively less rigid materials. Also, it’s safe to say that one can use a circular saw by holding it in one’s hands. 

But, a marble cutter is primarily used to cut through concrete, tiles, cement, rods, and bricks. These materials tend to be much more challenging, so this cutter is a stationary machine. To provide ample stability for cutting heavy objects, the manufacturer makes sure that marble cutters are equipped with stable stands.

2. Easiness of Usage

A circular saw is generally lighter in terms of weight. Because of this feature, they’re easy to carry around, and you can also drive them to use even in intricate spaces where you have less freedom of movement. Moreover, it can operate with only one hand. 

On the other hand, a marble cutter cannot be used with only one hand. This tool is only used when it is set stationary on the ground. You still can carry this machine with you, but it won’t be fair to say that it’s a lightweight machine. Also, It is not convenient to use a marble cutter where you don’t have adequate freedom of movement.

3. The Speed or Motor Rpm

The motor has to be equipped with high torque capability for a circular saw because it handles various types of objects ranging from very soft to very hard. That is why, for a circular saw, the motor’s torque is much higher. But, the motor RPM is relatively lower (around 5000 RPM).

On the flip side, in the case of a marble cutter, it is only utilized to cut through super solid and rigid materials. That is why this machine is well equipped with a very high RPM motor. So, a marble cutter will usually have a 10,000 RPM motor or more increase.

4. The magnitude of Cutting Depth

Generally speaking, a circular saw will always have a higher cutting depth than a marble cutter. On average, most circular saws will have at least 60 to 70 mm of cutting depth. The main perk of using a circular saw is that this machine’s more considerable cutting depth facilitates it to cut through diversified types of objects.

But, for a marble cutter, since it’s only used for cutting through complex objects like tiles and rods, it doesn’t need to have a considerable cutting depth. On average, a marble cutter will have 30 to 34mm of cutting Depth (which is relatively less than circular saws).

5. Protective Shield

Since circular saws are used as handheld machines, the manufacturers ensure that they are equipped with adequate protective shields. The effective guards protect the hands from accidental damage. That’s why, even if you leave a circular saw on the ground in a running condition, it won’t accidentally damage the surface of the floor because of its protective shield.

On the other hand, marble cutters are also equipped with protective shields. But, the protective layer of a marble cutter is very different from a circular saw. A marble cutter is designed to cut downwards relative to the machine body. That’s why, if you are not careful enough while using it, the floor can be damaged by the marble cutter.

Can I Cut Marble with a Circular Saw?

You were technically speaking, Yes. You can use a circular saw to cut objects meant to be cut by marble cutters. But, for that to happen, you need to have a stainless steel blade installed that can withstand the pressure of the cutting job. Also, you will need a large-sized, high-powered circular saw instead of a marble cutter.

Moreover, circular saws have less motor RPM than marble cutters, and they might take a bit longer to cut through an object. Also, the accuracy of the cutting line of a circular saw can’t be as good as a marble cutter (but you can minimize the deviation by holding it still).

Conversely, if you attempt to cut tiles or rods with a low-powered circular saw, it’ll put too much strain on the motor. In turn, this can eventually cause permanent damage to the circular saw. So, we recommend consulting with an expert before using a circular saw as a replacement for a marble cutter.

Which Marble Cutter is Best for its Job? 

According to our analysis on multiple marble cutters, the best marble cutter needs will have the below features:

1. Versatility

A good quality model cutter must be helpful to cut through multiple types of complex objects such as tiles, rods, concrete, bricks, etc. The more things a marble cutter can handle, the more valuable it is to the user.

2. Power Efficiency

Top-notch marble cutters in the market will be very efficient in electricity consumption. For example, if a marble cutter is rated with 1,000 watts of power, it must at least provide a power output close to 1,000 watts. 

3. Moto RPM

The motor is the core component of a marble cutter. That is why the engine needs to be powerful enough to pull off even the most challenging types of jobs. The best marvel cutters must have a motor with 10,000 RPM capability.

4. Lightweight

A machine isn’t that useful if it’s not easy to carry with you, right? The same goes for a marble cutter. Premium quality marble cutters must be 2 to 3 kilograms in weight. As a result, they are easily portable.

5. Ample Wanted Period

The nature of an electric machine is that it can deteriorate anytime without any precursors. That’s why top-notch marble cutters are paired with at least 2 to 3 years of warranty service. 

Frequently Asked Questions

Can I Use a Circular Saw to Cut Metal?

Well, a circular saw is not ideal to use for cutting metals. But, if you pair it up with a high-grade stainless steel blade, it can cut through metals. Although it’s not recommended, cutting metals is not very rare to see.

Is it Better to Have More Teeth on My Circular Saw or Marble Cutter Blades?

Yes, absolutely. The more teeth you have on the blade, the smoother the cut will be by the machine. That’s why larger blades with more teeth have shown better results in cutting different types of objects.

Conclusion

Now that you know the fair usage and purpose of a circular saw and a marble cutter, we are sure that you will take better advantage of these two tools since you have a transparent idea of which you’ll now be a better workman than ever before.

But whatever purpose you use these tools for, we recommend that you follow the safety precautions while using them. At last, we bid you the best of luck.

Read more:

Hi, I am Gavin Ford. I am a full-time power tools salesperson and a part-time mechanic. I help my friends and neighbors with their tools. Which one to buy, how to buy it, how to use it, methods to fix broken tools, and so on. In I will do the same for the rest of the world. You will get everything you need to know about tools for regular and professional use.

Leave a Comment